TROUBLESHOOTING
While trouble with Hydrocell Washers is rare, we do see the odd hiccup. Below we’ve listed the top 3 issues our users may experience, which can be fixed quickly and easily from right where you are now. Follow our simple step-by-step guide on how to troubleshoot faults, and if you’re still having issues afterwards give us a call or send us an email and we will assist you with the information required to create a maintenance return.
Air Bubble
If you have an air bubble, your washer may stop working until the bubble is released. Make sure you’re outside or somewhere water can spit out freely before following the below steps to purge the outlet.
-
Take tank off (twist and pull up – not across)
-
Disconnect hose from base at the outlet connector
-
Turn Machine on and depress the white cross bar in
the tip of connector
If your problem was an air bubble, water will squirt out and machine will reset. This issue occurs when the pressure from the hose is not released after use.
BATTERY
If you predominantly charge your washer from the wall charger, plug in the 12V Car Charger cable inbuilt to the base of your washer.
-
When Plugged in to the 12V car charger, does your washer work?
-
YES > Your battery may have been dislodged slightly from its terminal. Unscrew the base plate and adjust.
-
NO > Oh no, it sounds like your battery has died! You can purchase a replacement battery by calling 1300 974 971
FUSE
The fuse is located under the base plate, unscrew the base plate and follow the wires. If the fuse connection is broken, you’ll need a new fuse. These are standard fuses that readily available from your local hardware store, or if you get stuck you can give us a call.